V_1.OM.000160.DRM
Page 61
Version 5.0
Doremi Labs, Inc.
12.1.2.3 Recording in Time Code Mode
To record using the Source Time-Code:
•
The NDF/DF selection when creating the file (OPTION MENU (03) ”New Rec Set”)
should match the source time-code.
•
Select “LTC” or “ATC” time-code (OPTION MENU (17)).
•
Select “Time Code” in the Time Code Mode menu (MENU (02)).
•
Press the
REC
button only to set the V1-HD in EE mode. (Displays the video on the
input).
•
If you see a valid video signal on your monitor, and if the displayed time-code is
increasing you can press
REC
and
PLAY
at the same time to start recording.
•
Press
STOP
to finish the recording.
Note: The message “Wrong TC Fed” will be displayed in the following cases:
•
The time-code fed is not detected.
•
The selection of LTC/ATC is not the same as the time-code source.
•
The NDF/DF file setting does not match the incoming time-code format (NDF/DF)
•
The incoming time-code exceeds the time-line duration.
