Dodge 2012 Grand Caravan Owner'S Manual Download Page 394

Page: 394 / 695

Play A DVD Using The VES™ Player — If
Equipped

1. Insert the DVD with the label facing up. The VES™

player automatically selects the appropriate mode
after the disc is recognized and starts playing the
DVD.

NOTE:

The VES™ player has basic DVD control func-

tion such as Menu, Play, Pause, FF, RW and Stop.

2. To watch a DVD on Screen 1 for second row passen-

gers, ensure the Remote Control and Headphone
switch is on Channel 1.

3. To watch a DVD on Screen 2 for third row passengers,

ensure the Remote Control and Headphone switch is
on Channel 2.

Using The Remote Control

1. Press the SOURCE button on the Remote Control.

2. While looking at Screen 1 or 2, highlight VES DISC by

either pressing Up/Down/Left/Right buttons or by
repeatedly pressing the SOURCE button, then press
ENTER/OK on the Remote Control.

Select VES DISC Mode On The VES Screen

392

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2012 Grand Caravan
























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Grand Caravan

Reviews:

Related manuals for 2012 Grand Caravan

Brands by name

Popular brands

Dodge 2012 Grand Caravan, Owner'S Manual

Search results

Summary of Contents for 2012 Grand Caravan

Reviews:

Related manuals for 2012 Grand Caravan

Brands by name

Popular brands