Loading the Paper
3.2 Loading Paper
Press the Ready switch to move the paper perforation on to the tear blade.
Make sure that the top part of the transparent cover is folded down, and
tear off the paper. Press the Ready switch again to move the paper back to
its previous position (the first printable line).
NOTE: To use Document on Demand correctly, make sure that the value of
the printer’s form length matches the physical paper size. For selecting form
length, see Section A.1, Specifications.
3.2.2 Single-sheet Loading
1.
Check that there is no paper loaded under the platen and in the print
position. If there is paper in that position, put the paper into the Parking
position (see Section 3.2.3).
2.
Raise the rear paper support, and set it in the sloping position with the
prop.
Loading the Paper 3–15
