Configuring the Printer
4.4 Summary of Set-up Features
Table 4–3 PROTOCOL SELECTION menu
Menu Item
Parameter
PORT DEPENDENT, DEC PPL2, IBM PP III, EPSON FX-1050
or Optional Emulation
1
PORT DEPENDENT
SERIAL PORT
DEC PPL2, IBM PP III,
EPSON FX-1050 or Optional Emulation
1
PARALLEL PORT
DEC PPL2, IBM PP III,
EPSON FX-1050 or Optional Emulation
1
1
This item depends on the Optional Emulation Selection. Factory setting is EPSON FX-1050.
When an optional emulation card is used and is selected, the actual optional emulation name is
printed here.
Table 4–4 COMMUNICATIONS Menu
Menu Item
Parameter
PORT
SELECTION
SERIAL PORT, PARALLEL PORT, AUTOMATIC
SERIAL COMM
BAUD RATE
150, 300, 600, 1200, 2400, 4800, 9600
DATA FORMAT
7-SPACE, 7-MARK, 7-NONE, 7-EVEN, 7-ODD, 8-NONE, 8-
EVEN, 8-ODD
BUFFER
CONTROL
XON/XOFF, DTR
MONITOR DSR
NOT SELECTED,
SELECTED (received data ignored from serial line and data not
sent to host when DSR is low)
DISCON/FAULT
NOT SELECTED,
DROP DTR
2
(on any fault, the DTR signal is dropped until the
fault is cleared),
PULSE DTR
2
(on any fault, the DTR signal is dropped for 5
seconds),
BREAK SIGNAL (break signal sent on any fault ; a break signal
is a space condition transmitted for 0.275 seconds)
2
These features are disabled if BUFFER CONTROL is set to DTR.
Configuring the Printer 4–11
