Loading the Paper
3.2 Loading Paper
3.2.3 Parking Continous Stationery
You can switch from rear loading continous stationery to single-sheet loading
even if you already have continuous pinfeed stationery loaded in the printer. If
you have stationery already loaded, you must tear off any completed forms.
To switch from rear loading to single-sheet loading (this switching is called the
Park function):
1.
Press PAUSE to pause the printer. The Ready indicator should blink. (You
must tear off any completed forms.)
2.
Press PARKING. The paper feeds back to the parking position, and the
Fault indicator lights.
3.
Set the paper selection lever to the front of the printer.
4.
You can now load single-sheet paper.
NOTE: When you use the Park function, backward paper motion is limited to
two forms. If paper is still detected under the platen after two forms, it is fed
forward to ensure that the paper is positioned in front of the printhead.
NOTE: Parking does not function if you have disabled Backward Motion in
Set-up (under the General menu).
Loading the Paper 3–19
