Loading the Paper
3.2 Loading Paper
11. If you are using originals (no carbon or carbonless copies), or originals plus
not more than one carbon or carbonless copy, you can position the rear
paper support horizontally so that the tractor is completely covered. Close
the transparent covers so that they lie flat against the paper support.
Figure 3–9 Positioning the Rear Paper Support Horizontally
3.2.1.1 Automatic Paper Feed
You can now advance the paper to the print position by activating the
automatic paper feed as follows:
•
Set the power switch to ON (1).
All the indicators light up on the Control Panel.
For tractor-fed paper, the printhead moves to the center, and the paper
moves under the platen to the print position.
•
If the power was already ON, press FF to load the paper.
When paper is loaded to the print position, the Fault indicator turns off.
You are now ready to print.
3–12 Loading the Paper
