Internal Console
Figure E–1 Internal Console
TOP OF FORM
TOP OF FORM
TOP OF FORM
DUMP
LINE
PRINT TEST
FORM LENGTH
SET TOP OF FORM
SAVE
FAULT
SET-UP
The following modes can be initiated at power-up with the front cover open, by
pressing a button on the internal console:
•
Printing self-test
Pressing the PRINT TEST key at power-up causes the printer to enter the
printing self-test, as described in Section 1.4, Testing the Printer. The test
begins when the front cover is closed and the paper is successfully loaded.
•
DUMP printing
Pressing the DUMP key at power-up causes the printer to enter the DUMP
mode (or Printing Control Characters mode) as described in Appendix D.
The test begins when the front cover is closed and the paper is successfully
loaded.
•
Top of Form setting
E–2 Internal Console
