Configuring the Printer
4.4 Summary of Set-up Features
4.4 Summary of Set-up Features
The following tables list the Set-up menu features and reflect the Set-up
architecture.
In the Menu Items column, the main menu items are bolded.
In the Parameter column, the default setting of each parameter is bolded. This
is the factory setting and is automatically reset when the FACTORY DFLT
feature is selected, with the exception of the Optional Emulation Selection.
Table 4–1 SET-UP DIRECTORY menu
PRINT, GENERAL, PROTOCOL SELECTION,
COMMUNICATIONS, DEC PPL2, IBM PP III, EPSON
FX-1050 or Optional Emulation
1
, FACTORY DFLT
1
This item depends on the Optional Emulation Selection. Factory setting is EPSON FX-1050.
When an optional emulation card is used and is selected, the actual optional emulation name is
printed here.
Table 4–2 GENERAL Menu
Menu Item
Parameter
FORM LENGTH
3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11 (A), 11 2/3 (A4), 12, 14, 15 INCHES
and USER
PAPER WIDTH
1"-8", 8", 13.6"
PRINT QUALITY
FORCED HSD, FORCED NLQ1, FORCED NLQ2,
SOFT/CONTROL
TYPESTYLE
INTERNAL, "Card style 1", "Card Style 2"
NLQ DIRECTION
BIDIRECTION (prints 2-pass modes in two directions),
UNIDIRECTION (prints 2-pass modes in one direction)
BACKWARD
MOTION
ENABLED,
DISABLED (no viewing and parking functions)
AUTO ADVANCE
NOT SELECTED,
SELECTED
BOTTOM OF
FORM
0, 1 INCH (an automatic feed to next top of form is executed at 1
inch from the bottom of the form)
INPUT BUFFER
16K, 32 K (no downloaded font capability in IBM PP III and
EPSON FX-1050 modes)
ERROR BEEP
ONE BEEP, THREE BEEPS, CONTINUOUS, OFF
PAPER OUT
SELECTED, NOT SELECTED (no error beep on paper out)
4–10 Configuring the Printer
