Epson FX-1050 Quick Reference
Table J–5 User-Defined Characters
Command
Description
Notes
ESC & NUL n m
a1 d1 ... dk
Draft User-Defined
Characters
(8-dot h. x 11-dot w.)
n and m : first and last characters defined (0-255)
a1 : attribute :
bit 7 (MSB) 1 : upper 8 pins ; 0 : lower 8 pins
bits 6-4 : start column number (0-7)
bits 3-0 : end column number (1-11)
d1 ... d11 : character matrix data.
Each character is defined by a sequence
ai di1
... di11
.
NLQ1 characters are built from the Draft user-
defined characters.
ESC : NUL n
NUL
Copy ROM Generator to
RAM (Italic Character
table)
Clears previous user-defined characters.
n = 0/0 : Resident NLQ2
n = 0/1 : Resident NLQ1
ESC % n
User-Defined Characters
selection
n = 0/0 : Select the standard character set
n = 0/1 : Select the user-defined character set
Table J–6 Graphics
Command
Description
In the following sequences, n1 and n2 define the number of horizontal dots, maximum value for
n2 is 31 ; d1 ... dk are the bit-image data. Vertical density is 72 dpi for all modes.
ESC K n1 n2 d1 ... dk
Normal-Density Bit-Image Graphics; Horizontal density: 60 dpi.
ESC L n1 n2 d1 ... dk
Dual-Density Bit-Image Graphics, half-speed ; Horizontal density:
120 dpi.
ESC Y n1 n2 d1 ... dk
Dual-Density Bit-Image Graphics, normal-speed ; Horizontal
density: 120 dpi ; Second consecutive horizontal dot is ignored.
ESC Z n1 n2 d1 ... dk
High-Density Bit-Image Graphics ; Horizontal density: 240 dpi ;
Second consecutive horizontal dot is ignored.
(continued on next page)
J–4 Epson FX-1050 Quick Reference
