Digital Equipment LA310, Installation And User Manual

Page: 195 / 208

Epson FX-1050 Quick Reference
Table J–6 (Cont.) Graphics
Command Description
ESC * m n1 n2 d1 ... dk
8-wire BIM
mode selection m: Horizontal density:
0/0 : 60 dpi (Normal density)
0/1 : 120 dpi (Double density, Half speed)
0/2 : 120 dpi (Double density, Normal speed)
0/3 : 240 dpi (Quadruple density)
0/4 : 80 dpi (Graphics CRT I)
0/5 : 72 dpi (Plotter 1:1)
0/6 : 90 dpi (Graphics CRT II)
0/7 : 144 dpi (Plotter, double density)
ESC ? n m
Redefines BIM
command n = K, L, Y, Z.
m is same as in command
ESC *
.
ESC ^ m n1 n2 d1 ... dk 9-wire BIM
mode selection m = 0/0 : Select normal density (60 dpi)
m = 0/1 : Select double density (120 dpi)
Table J–7 Horizontal Form Handling
Command Description Notes
ESC l n Set Left Margin n : Column number for left margin
ESC Q n Set Right Margin n : Column number for right margin
BS
(0/8) Backspace
ESC $ d1 d2 Absolute Horizontal
positioning d1 and d2 define the absolute position in 1/60"
from left margin
ESC
n
d1 d2
Relative Horizontal
positioning d1 and d2 define the relative position in 1/120" ,
left or right from current position.
HT (0/9) Horizontal Tab
ESC D d1 ...
dk NUL Set Horizontal Tabs di : column numbers. di values must be in
ascending order.
ESC D NUL clears previous
tab setting. Maximum number of tabs is 32.
ESC a n
Line Justification
mode n = 0/0 or 3/0 : Line Left-justified to left margin
n = 0/1 or 3/1 : Line Centered between margins
n = 0/2 or 3/2 : Line Right-justified to right margin
n = 0/3 or 3/3 : Both margins justified
Epson FX-1050 Quick Reference J–5