Delta Electronics MVF2000 Series, Product Manual

Page: 100 / 136

58
Reserved DO
Normal open:
Effective by closing
Reserved
59
60~100 Spare - - Spare
The digital input terminals above are required to be passive nodes with a capacity of
1A/24VDC. The digital output terminals provided by the system are passive nodes with a
capacity of 6A/250VAC or DC. The definition above of all the I/O terminals is default, and can
be defined and configured again according to the user requirements.
7-4 Typical application wiring map
Fig.7-5 Typical application wiring map
7-5 Cautions
For the specific wiring scheme, see the Site wiring diagram. The following items shall be
noted during wiring:

The high voltage cables between the MVD and the user equipment (high voltage power
cabinet and motor) are suggested to be armored cables with shielding function (prevent
damage by small animals such as mice; and meet EMC requirements);