Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0
| User Guide
Instant User Interface |
29
Restore Configuration—
Click
Restore Configuration
to browse and locate the backup file to restore.
Reboot the IAP for the changes to take effect.
Certificates
— Displays information about the current certificate installed in the network. Provides an
interface to upload new certificates and to set a passphrase for the certificates. For more information, see
“Certificates” on page 129
.
Firmware
— Displays the current firmware version and provides options to upgrade to a new firmware version.
For more information, see
“Upgrading to New Version” on page
90
.
Reboot
— Displays the IAPs in the network and provides an option to reboot the required access point or all
access points. For more information, see
“Rebooting the IAP” on page
87
.
Convert
— Provides an option to change the network from a Virtual Controller managed network to a Dell
Mobility Controller managed network. For more information, see
“Migrating to a Mobility Controller
Managed Network” on page
83
.
Figure 17
Maintenance Link — Default View
Summary of Contents for PowerConnect W-IAP3WN
Page 1: ...Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 10: ...10 Contents Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 106: ...106 NTP Server Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 134: ...134 Authentication Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...