224
| Policy Enforcement Firewall
Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0
| User Guide
Figure 202
Client Blacklisting
Types of Client Blacklisting
The following types of client blacklisting can be generated in an Instant:
Manual Blacklisting
Dynamic Blacklisting
Authentication Failure Blacklisting
Session Firewall Based Blacklisting
Manual Blacklisting
Manual blacklisting is the simplest way to add a client to the blacklist. In manual blacklisting, the MAC address
of the client has to be known to the user. These clients would be added into a permanent blacklist. These clients
are not allowed to connect to the network unless they are removed from the blacklist.
Adding a Client to the Manual Blacklist
To add a client to the blacklist manually using the MAC address of the client:
1. Click on the
PEF
link and then select
Blacklisting
tab.
2. Click on the
New
button under the
Manual Blacklisting
window.
3. Enter the MAC address of the client to be blacklisted in the
MAC address to add
textbox.
Figure 203
Manual Blacklisting
Summary of Contents for PowerConnect W-IAP3WN
Page 1: ...Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 10: ...10 Contents Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 106: ...106 NTP Server Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 134: ...134 Authentication Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
