manualshive.com logo in svg

Dell PowerConnect W-IAP3WN, User Manual

Share
Download
Dell PowerConnect W-IAP3WN User Manual Download Page 88

88

  |  Managing IAPs

Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0

  | User Guide

Figure 75  

Rebooting the IAP

3. In the IAP list, select the IAP that you want to reboot and click 

Reboot selected Access Point

. To reboot all 

the IAPs in the network, click 

Reboot All.

4. The 

Confirm Reboot for IAP window

 appears. Click 

Reboot Now

 to proceed.

Figure 76  

Confirm Reboot message

5. The 

Reboot in Progress 

message appears indicating that the reboot is in progress.

Figure 77  

Reboot In Progress

6. The 

Reboot Successful

 message appears once the process is complete. If the system fails to boot, then the 

Unable to contact Access Points after reboot was initiated message

 appears

.

Figure 78  

Reboot Successful

7. Click 

OK 

to close the window

 

and re-login to the system.

Summary of Contents for PowerConnect W-IAP3WN























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands