manualshive.com logo in svg

Dell PowerConnect W-IAP3WN, User Manual

Share
Download
Dell PowerConnect W-IAP3WN User Manual Download Page 182

182

  |  Uplink Configuration

Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0

  | User Guide

Figure 153  

Uplink Status

The user can view the type of uplink and the status of the uplink in the Instant UI under 

Info

 tab.

Figure 154  

Uplink Status

3G/4G Uplink

Instant now supports the use of 3G/4G USB modems to provide internet backhaul to an Instant network. The 3G/
4G USB modems extend client connectivity to places where an Ethernet uplink is not feasible. This enables the 
RAP-3 to choose the available network in an area automatically. For 4G LTE modem, 4G takes precedence over 
3G when the RAP-3 tries to auto-select the network

.

Types of Modems 

Instant supports the following three types of 3G modems:

True Auto Detect

— Modems of this type can be used only in one country and for a specific ISP. The 

parameters are configured automatically and hence no configuration is necessary (Plug and Play).

Auto- ISP/country

— Modems of this type are used where user needs to specify the Country and ISP. 

The same modem is used for different ISPs with different parameters configured for each of them. 

No auto-detect

—Modems of this type are used where the modems share the same Device-ID, Country, and 

ISP, but need to configure different parameters for each of them. These modems work with Instant provided 
the correct parameters are configured. All the new auto-detected modems falls under this category as the 
parameter necessary to automatically configure them are unknown.

The following table lists the types of supported 3G modems:

NOTE:  

The 3G and 4G LTE USB modems can be provisioned only on RAP-3.

Summary of Contents for PowerConnect W-IAP3WN























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands