228
| VPN Configuration
Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0
| User Guide
Controller. The traffic going to the corporate is send via L2 GRE tunnel from the AP itself and does not
have to be forwarded through the Virtual Controller.
4. Enter the IP address or fully qualified domain name for the main VPN/GRE endpoint in the
Primary host
field.
5. Enter the IP address or fully qualified domain name for the backup VPN endpoint in the
Backup host
field.
This entry is optional.
6. Select
Enabled
from the
Preemption
drop-down list to switch back to the primary host when and if it
becomes available again. This step is optional.
7. Click
Next
to continue.
Routing Profile Configuration
Instant can terminate VPN connections on Dell Mobility Controllers. The Routing profile defines the corporate
subnets which need to be tunneled through the IPSec tunnel.
Figure 207
Tunneling— Routing
Use the
Routing Table
to specify policy based on routing into the VPN tunnel. Each routing table entry has a
destination, network mask, and default gateway.
8. Click
New
and update the following parameters.
Destination— Specify the destination network to be routed into the VPN tunnel.
Netmask— Specify the network mask of the network to be routed into the VPN tunnel.
Gateway— Specify the default gateway to which traffic should be routed. This IP address should be the
‘controller-ip’ of the controller on which the VPN connection is terminated. See
“Controller Configuration
for VPN” on page
241
for more information.
In the example above, 10.0.0.0/8 network is configured as the corporate destination and is routed through
the controller-ip of the primary controller.
9. Click
Next
to continue.
10. The
DHCP Server
window appears. Use this table to define DHCP pools of different types based on your
deployment modes as described in the following section.
NOTE:
By default, the Per-AP tunnel option is disabled.
Summary of Contents for PowerConnect W-IAP3WN
Page 1: ...Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 10: ...10 Contents Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 106: ...106 NTP Server Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 134: ...134 Authentication Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
