152
| Instant Firewall
Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0
| User Guide
Figure 129
Defining Rule — Allow POP3 Service to a Particular Server
Deny FTP Service except to a Particular Server
1. Click the
New
link in the
Networks
tab.
To define the access rule to an existing network, click the network. The
edit
link appears. Click the
edit
link
and navigate to the
Access
tab.
2. In the
WLAN Settings
tab, enter the appropriate information and click
Next
to continue.
3. Use the
VLAN
tab, to specify how the clients on this network will get their IP address and VLAN.Click
Next
to continue.
4. Click
Next
and set appropriate security levels using the slider bar in the
Security
tab.
5. Click
Next
. The
Access
tab appears. The
Allow any to all destinations
access rule is enabled by default. This
rule allows traffic to all destinations. To define deny FTP service access rule except to a particular server,
perform the following steps:
a. Click
New
, the
New Rule
window appears.
b. Select
Deny
from the
Action
drop-down list.
c. Select
ftp
from the
Service
drop-down list.
d. Select
except
to a particular server
from the
Destination
drop-down list and enter appropriate IP address
in the
IP
text box.
e. Click
OK
.
6. Click
Finish
.
Summary of Contents for PowerConnect W-IAP3WN
Page 1: ...Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 10: ...10 Contents Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 106: ...106 NTP Server Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 134: ...134 Authentication Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
