Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0
| User Guide
Wireless Network |
61
7. This tab allows you to configure the captive portal page and encryption for the Guest network. Select one of
the following splash page type:
Table 11
Conditions for Adding a Guest Network— Security Tab
Splash Page Type
Description and steps to set up
Internal — Authenticated
The user has to accept the terms and conditions and enter a username and password on
the captive portal page. If this option is selected, then add the users who are required to
use the captive portal authentication to the user database. Click the Users link to add the
users. For information about adding a user, see
“Adding a User” on page 235
. For
information on customizing the splash page, see
“Customizing a Splash Page” on
page 120
.
1.
Select the required Authentication server 1 option from the drop-down list. Available
options are:
New
— If you select this option, then an external radius server has to be configured
to authenticate the users. For information on configuring an external RADIUS server,
see
“Configuring an External RADIUS Server” on page 110
.
Internal Server
— If you select this option, then users who are required to
authenticate with the internal RADIUS server must be added. Click the Users link to
add the users. For information on adding a user, see
“Adding a User” on page 235
.
2.
Reauth interval
— When set to a value greater than zero, the Access Points will
periodically reauthenticate all associated and authenticated clients.
3.
Blacklisting
— Select Enabled if you want clients to be blacklisted after a certain
number of authentication failures.
4.
Max authentication failures
— Users who fail to authenticate the number of times
specified here will be dynamically blacklisted. The maximum value for this entry is
10.
5.
For Internal users —
Click
Users
to populate the system’s internal authentication
server with users. For information about adding a user, see “Adding a User” on
page 161.
6.
Click
Upload Certificate
and browse to upload a certificate file for the internal
server. See
“Certificates” on page 129
for more information.
7.
Redirect URL
— Users can be redirected to a specific URL (instead of the original
URL) after successful captive portal authentication. This entry is optional.
Internal — Acknowledged
The user has to accept the terms and conditions for this splash page type.
For information on customizing the splash page, see
“Customizing a Splash Page” on
page 120
.
1.
Encryption— Select Enabled from the Encryption drop-down list and perform the
following steps (these steps are optional):
Select the required key management option from the Key management drop-down
list. Available options are:
WPA-2 Personal
WPA Personal
Both (WPA-2 & WPA)
2.
Passphrase format— Specify either an alphanumeric or a hexadecimal string.
Ensure that the hexadecimal string must be exactly 64 digits in length.
3.
Passphrase— Enter a pre-shared key (PSK) passphrase.
Summary of Contents for PowerConnect W-IAP3WN
Page 1: ...Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 10: ...10 Contents Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 106: ...106 NTP Server Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 134: ...134 Authentication Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
