manualshive.com logo in svg

Dell PowerConnect W-IAP3WN, User Manual

The Dell PowerConnect W-IAP3WN User Manual is a comprehensive guide that enables users to maximize the potential of their device. This manual can be easily downloaded for free from manualshive.com, providing step-by-step instructions, troubleshooting tips, and important insights for seamless product setup and operation.

Share
Download
background image

Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0

  |  User Guide 

Uplink Configuration  |  

181

Chapter 22

Uplink Configuration

Uplink Configuration Overview

The Dell PowerConnect W-Instant supports 3G USB modems for the corporate Instant network. The 3G USB 
modems can be used to extend the connectivity to places where Ethernet uplink cannot be configured. By using 
this, the client traffic can reach the internet and the corporate network. It also provides a reliable backup link for 
the Ethernet based Instant network.

The following figure describes the IAP when the Ethernet connection is not configurable on an IAP network. The 
other IAPs also join the Virtual Controller as slave IAPs via a wired uplink.

Figure 152  

Uplink Types

The following types of uplinks are supported on Instant:

Ethernet

PPPoE

DHCP

Static IP

3G/4G LTE modem

Ethernet Uplink

The Ethernet 0 port on an IAP is enabled as an uplink port by default.

View the type of uplink and the status of the uplink in the Instant UI in the Info tab.

NOTE:  

Instant does not support configuration of an Eth0 uplink.

Summary of Contents for PowerConnect W-IAP3WN























































































































































































































































Reviews:

No comments

Related manuals for PowerConnect W-IAP3WN

Balluff BNI IOL-314-S52-P012 Assembly Instructions Manual preview
BNI IOL-314-S52-P012
Brand: Balluff Pages: 22
Field Controls 46112100 Manual preview
46112100
Brand: Field Controls Pages: 4
Techroutes S3756 Hardware Installation Manual preview
S3756
Brand: Techroutes Pages: 22
Vector MZ3-FA-V01 Manual preview
MZ3-FA-V01
Brand: Vector Pages: 6
Lantech IGS-2206C User Manual preview
IGS-2206C
Brand: Lantech Pages: 118
QCT QuantaMesh T1048-LB9M Installation Manual preview
QuantaMesh T1048-LB9M
Brand: QCT Pages: 34
SMART-AVI HDR4X2 Installation Manual preview
HDR4X2
Brand: SMART-AVI Pages: 2
Taiden TMX-0404SDI Installation And Operation Manual preview
TMX-0404SDI
Brand: Taiden Pages: 21
TP-Link LiteWave LS105G Installation Manual preview
LiteWave LS105G
Brand: TP-Link Pages: 3
A-Neuvideo ANI-8PDU-24V Instruction Manual preview
ANI-8PDU-24V
Brand: A-Neuvideo Pages: 12
Power Ethernet PE 200AV T1000 Quick Setup Manual preview
PE 200AV T1000
Brand: Power Ethernet Pages: 2
Edimax EK-PS2P User Manual preview
EK-PS2P
Brand: Edimax Pages: 3
steute EM 61 Mounting And Wiring Instructions preview
EM 61
Brand: steute Pages: 12
SK telecom HPS-1004GP User Manual preview
HPS-1004GP
Brand: SK telecom Pages: 7
Intermatic T2006 Supplementary Manual preview
T2006
Brand: Intermatic Pages: 1
SMC Networks D-P5DW Installation And Maintenance Manual preview
D-P5DW
Brand: SMC Networks Pages: 1
Eaton Moeller IZM Series Quick Start Manual preview
Moeller IZM Series
Brand: Eaton Pages: 4
Digital China Networks DCRS-5200 Series Specifications preview
DCRS-5200 Series
Brand: Digital China Networks Pages: 4

Brands by name

Popular brands

Load more brands