Dell PowerConnect W-IAP3WN, User Manual

Page: 21 / 246

Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0
| User Guide Instant User Interface |
21
Access Points Tab
If the Auto Join Mode feature is enabled, a list of enabled and active IAPs in the Dell Instant network is displayed
in the
Access Points tab. The IAP names are displayed as links.
If the Auto Join Mode feature is disabled, a New link appears. Click on this link to add a new IAP to the network.
If an IAP is configured and not active, its MAC Address is displayed in red.
The expanded view displays the following information about each IAP:

Name — Name of the access point.

IP Address — IP address of the IAP.

Mode— Mode of the IAP.

Spectrum— Enabled, if the IAP is configured as dedicated full-spectrum RF monitor.

Clients — Number of clients that are connected to the IAP.

Type — Model number of the IAP.

Mesh Role— Role of the mesh IAP

Channel — Channel the IAP is currently broadcasting on.

Power (dB) — Maximum transmit EIRP of the radio.

Utilization (%) — Utilization percentage of the IAP radios.

Noise (dBm) — Noise floor of the IAP.
An edit link appears on clicking the IAP name. For details about editing IAP settings see, “Editing IAP Settings”
on page 80 .
Figure 7
Access Points Tab— Compressed View and Expanded View
Clients Tab
This tab displays a list of clients that are connected to the Dell Instant network. The client names appear as links.
The expanded view displays the following information about each client:

Name — Name of the client.

IP Address — IP address of the client.

MAC Address — Mac address of the client.

OS — Operating system that the client is running on.

Network — Network that the client is connected to.

Access Point — IAP to which the client is connected.

Channel — Channel that the client is currently broadcasting on.

Type — Wi-Fi type of the client: A, G, AN, or GN.

Role— Role assigned to the client.

Signal— Indicates Signal strength .