Dell PowerConnect W-IAP3WN, User Manual

Page: 32 / 246

32
| Instant User Interface
Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0
| User Guide

VC Application Services— Displays the details of application services of the selected IAP, which includes
protocol number, port number .

VC Global Alerts— Displays all the alerts about client of the selected IAP .

VC Global Statistics— Displays the flow information and signal strength of the selected IAP.

VC Local User Database— Displays the user configuration of the selected IAP.

VC Radius Attributes— Displays the RADIUS attributes of the selected IAP.

VC Radius Servers— Displays the RADIUS servers’ configuration of the selected IAP.

VC Saved Configuration— Displays the saved configuration information of the selected IAP.

VC SNMP Configuration— Displays the SNMP configuration of the selected IAP.

AP Summary — Displays the IAP configuration.

Debug Logs — Displays debug logs of the selected IAP.

Driver Logs — Displays the driver logs of the selected IAP.

Tech Support Dump — Displays the technical support dump logs of the selected IAP.

Active Configuration — Displays the active configuration of Virtual Controller.

Saved Configuration — Displays the saved configuration of Virtual Controller.

AP Management Frames — Displays the traced 802.11 management frames of the selected IAP.

AP Authentication Frames — Displays the authentication trace buffer information of the selected IAP.

AP System Status — Displays detailed system status information for the selected IAP.

AP Crash Info — Displays crash log information (if it exists) for the selected IAP. The stored information is
cleared from the flash after the AP reboots.

AP 802.1X Statistics — Displays the 802.1X statistics of the selected IAP.

AP RADIUS Statistics — Displays the RADIUS statistics of the selected IAP.

AP System Status — Displays the system status of the selected IAP.

AP Client Table — Displays information of the client connected to the selected IAP.

AP Association Table — Displays information of the selected IAP association.

AP Allowed Channels — Displays information of the allowed channels for the selected IAP.

AP Radio 0 Stats — Displays aggregate debug statistics of the selected IAP Radio 0.

AP Radio 1 Stats — Displays aggregate debug statistics of the selected IAP Radio 1.

Bridge Table — Displays bridge table entry statistics including Mac address, VLAN, assigned VLAN,
Destination and flag information for the selected IAP.

User Table — Displays datapath user statistics such as current entries, pending deletes, high water mark,
maximum entries, total entries, allocation failures, invalid users, and maximum link length for the selected
IAP.

Session Table — Displays the datapath session table statistics for the selected IAP.

Route Table — Displays datapath route table statistics for the selected IAP.

Datapath Statistics — Displays the hardware packet statistics for the selected IAP.

VLAN Table — Displays the VLAN table information such as VLAN memberships inside the datapath
including L2 tunnels for the selected IAP.

BSSID Table — Displays the Basic Service Set (BSS) table of the selected IAP.

IDS Status — Displays WLAN Interface, Data Structures, WLAN Interface Switch Status and RTLS
Configuration tables for the selected IAP.

IDS AP Table — Displays the Monitored IAP Table, which lists all the IAPs monitored by the selected IAP.

ARM Bandwidth Management — Displays bandwidth management information for the selected IAP.