34
| Instant User Interface
Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0
| User Guide
Figure 21
Monitoring on Instant UI
Info
Displays the configuration information of the Virtual Controller by default. In a
Network View
, this section
displays configuration information of the selected network. Similarly, in an
Instant Access Point View
or
Client
View
, this section displays the configuration information of the selected IAP or the client.
Figure 22
Info Section in the Monitoring Pane
RF Dashboard
Allows you to view trouble spots in the network. It displays the following information:
Figure 23
RF Dashboard in the Monitoring Pane
The following table lists the icons in the RF Dashboard.
Clients— Lists the clients with low speed or signal strength in the network.
Signal— Displays the signal strength of the client. Depending on the signal strength of the client, the color
of the lines on the Signal bar changes from Green > Orange > Red.
Green— Signal strength is more than 20 decibels.
Table 3
RF Dashboard icons
Icon
Name
1
Signal bar
2
Speed icon
3
Utilization icon
4
Noise icon
5
Errors icon
Summary of Contents for PowerConnect W-IAP3WN
Page 1: ...Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 10: ...10 Contents Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 106: ...106 NTP Server Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 134: ...134 Authentication Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
