Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0
| User Guide
Instant User Interface |
23
Settings
This link displays the
Settings
window. The
Settings
consists of the following tabs:
Figure 9
Settings Link
General
— View or edit the Name, IP address, NTP Server, and DHCP server settings of the Virtual
Controller. For information about Virtual Controller settings and NTP Server, see
Chapter 9, “Virtual
Controller”
and
Chapter 8, “NTP Server”
. For information about Auto join mode, Terminal Access, LED
display, TFTP Dump Server, and Deny inter user bridging see
Chapter 5, “Managing IAPs”
.
Admin
— View or edit the admin credentials for access to the Virtual Controller Management User Interface.
See
“Management Authentication Settings” on page
116
for more information. You can also configure Dell
PowerConnect W-AirWave in this tab. See
“Configuring Dell PowerConnect W-AirWave” on page
191
for
more information.
Wired
— Specify the desired profile for each port of the IAP. See
Chapter 21, “Ethernet Downlink”
for more
information.
RTLS
— View or edit the RTLS server settings.
Dell RTLS—
Enable this to integrate with Dell PowerConnect W-AirWave Management platform,
Ekahau Real Time Location Server and Nearbuy Real Time Location Server. Specify the IP address and
port number of the server to which location reports are sent, a shared secret key, and the frequency at
which packets are sent to the server.
Update
indicates how frequently the Virtual Controller updates the
RTLS server.
Aeroscout
— Enables the AP to send RFID tag information to an AeroScout real-time asset location
(RTLS) server. Specify the IP address and port number of the AeroScout server to which location reports
should be sent.
NOTE:
Use the
Show/Hide Advanced
option on the bottom-left of the Settings window to view or hide the advanced options.
Summary of Contents for PowerConnect W-IAP3WN
Page 1: ...Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 10: ...10 Contents Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 106: ...106 NTP Server Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 134: ...134 Authentication Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
