118
| Authentication
Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0
| User Guide
Figure 100
Configuring Captive Portal when Adding A Guest Network
The appearance of a splash page can be customized as required. For information on customizing a splash page,
see
“Customizing a Splash Page” on page
120
.
6. Select
InternalServer
from the
Auth server
1 drop-down list to authenticate user credentials at run time.
7.
Reauth interval
— When set to a value greater than zero, the Access Points will periodically reauthenticate all
associated and authenticated clients.
8.
Blacklisting
— Select
Enabled
if you want clients to be blacklisted after a certain number of authentication
failures.
9.
Max authentication failures
— Users who fail to authenticate the number of times specified here will be
dynamically blacklisted. The maximum value for this entry is 10.
10.
For Internal users
—
Click
Users
to populate the system’s internal authentication server with users. For information about
adding a user, see
“Adding a User” on page
235
”.
Click
Upload Certificate
and browse to upload a certificate file for the internal server.
11.
Encryption
— Select
Enabled
from the drop-down list and perform the following steps (these steps are
optional):
a. Select the required key management option from the Key management drop-down list. Available options
are:
WPA-2 Personal
WPA Personal
Both (WPA-2 & WPA)
b.
Passphrase format
— Specify either an alphanumeric or a hexadecimal string. Ensure that the
hexadecimal string must be exactly 64 digits in length.
c.
Passphrase
— Enter a pre-shared key (PSK) passphrase.
12. Click
Next
and click
Finish.
Configuring Internal Captive Portal Authentication when Editing a Guest Network
To configure internal captive portal authentication when editing a guest network, perform the following steps:
Summary of Contents for PowerConnect W-IAP3WN
Page 1: ...Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 10: ...10 Contents Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 106: ...106 NTP Server Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 134: ...134 Authentication Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
