174
| SNMP
Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0
| User Guide
To configure an SNMP trap receiver:
1. Enter a name in the
SNMP Engine ID
text box.It indicates the name of the SNMP agent on the access point.
SNMPV3 agent has an engine ID that uniquely identifies the agent in the device and is unique to that
internal network.
2. Click
New
and update the following fields:
a.
IP Address—
Enter the
IP Address
of the new SNMP Trap receiver.
b.
Version—
Select the SNMP version—
v1, v2c, v3
from the drop-down list. The version specifies the
format of traps generated by the access point.
c.
Community/Username—
Specify the community string for SNMPV1 and SNMPV2c traps and a
username for SNMPV3 traps.
d.
Port—
Enter the port to which the traps are sent. The default value is 162.
e.
Inform—
When enabled, traps are sent as SNMP INFORM messages. It is applicable to SNMPV3 only.
The default value is
Yes
.
3. Click
OK
to view the trap receiver information in the
SNMP Trap Receivers
window.
NOTE:
Dell PowerConnect W-Series-specific management information bases (MIBs) describe the objects that can be managed
using SNMP. See the
Dell PowerConnect W-Series Instant Access Point MIB Reference Guide
for information about the Dell
PowerConnect W-Series and Aruba MIBs and SNMP traps.
Summary of Contents for PowerConnect W-IAP3WN
Page 1: ...Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 10: ...10 Contents Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 106: ...106 NTP Server Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
Page 134: ...134 Authentication Dell PowerConnect W Series Instant Access Point 6 1 3 4 3 1 0 0 User Guide ...
