Dell Force10 Z9000, Reference Manual

Page: 490 / 1483

Related
Commands router bgp – Enter ROUTER BGP mode and configure routes in an AS.
neighbor remove-private-as
Remove private AS numbers from the AS-PATH of outgoing updates.
C-Series, E-Series
Syntax neighbor { ipv6-address | peer-group-name } remove-private-as
To return to the default, use the
no neighbor { ipv6-address | peer-group-
name } remove-private-as
command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-group-name
Enter the name of the peer group to remove the private AS numbers.
Defaults Disabled (that is, private AS number are not removed).
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
Usage
Information
Applies to EBGP neighbors only.
If the AS-PATH contains both public and private AS number or contains AS numbers of an
EBGP neighbor, the private AS numbers are not removed.
If a confederation contains private AS numbers in its AS-PATH, the software removes the
private AS numbers only if they follow the confederation numbers in the AS path.
Private AS numbers are 64512 to 65535.
neighbor route-map
Apply an established route map to either incoming or outbound routes of a BGP neighbor or peer group.
C-Series, E-Series
Syntax neighbor { ipv6-address | peer-group-name } route-map map-name
{in | out}
To remove the route map, use the
no neighbor { ipv6-address | peer-group-
name } route-map map-name {in | out}
command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
490