Dell Force10 Z9000, Reference Manual

Page: 148 / 1483

Example (media
slot)
FTOS#show inventory media 3
Slot Port Type Media Serial Number F10Qualified
-----------------------------------------------------
...
3 11 SFP 1000BASE-SX U9600L0 Yes
...
Example
(inventory)
FTOS#show inventory media
Slot Port Type Media Serial Number F10Qualified
----------------------------------------------
1 0 SFP 1000BASE-SX P11BWXZ Yes
1 1 SFP 1000BASE-LX H833612 Yes
1 2 SFP 1000BASE-SX B342232075 Yes
1 3 SFP 1000BASE-SX P6F02U2 Yes
1 4 SFP 1000BASE-SX AMGX367 Yes
1 5 SFP 1000BASE-SX B320210155 Yes
1 6 SFP 1000BASE-SX B342232168 Yes
1 7 SFP 1000BASE-SX H11VJ8F Yes
1 8 SFP 1000BASE-SX AJUR367 Yes
1 9 SFP 1000BASE-SX AJLH367 Yes
1 10 Media not present or accessible
1 11 Media not present or accessible
1 12 SFP 1000BASE-SX P11DCP3 Yes
!----------------- output truncated ---------!
Related
Commands
show interfaces – displays a specific interface configuration.
show interfaces transceiver – displays the physical status and operational status of an
installed transceiver. The output also displays the transceiver’s serial number.
show inventory (S-Series and Z-Series)
Display the S-Series or Z-Series switch type, components (including media), and FTOS version, including hardware
identification numbers and configured protocols.
S-Series, Z-Series
Syntax show inventory [media slot ]
Parameters
media
slot
(OPTIONAL) Enter the keyword
media
followed by the stack ID of the
stack member for which you want to display pluggable media
inventory.
NOTE: This parameter is available but not supported in FTOS
version 8.3.11.4. Because stacking is not supported, if you use this
parameter, the output displays “Media not present or accessible”
(refer to the
Usage Information section).
Defaults none
Command Modes CONFIGURATION
148