key-encryption-
type
(OPTIONAL) Specifies if the key is encrypted.
Valid values: 0 (key is not encrypted) or 7 (key is encrypted).
key
Text string used in authentication.
The required lengths of a non-encrypted or encrypted key are:
3DES - 48 or 96 hex digits; DES - 16 or 32 hex digits; AES-CBC -32 or 64
hex digits for AES-128 and 48 or 96 hex digits for AES-192.
authentication-
algorithm
Specifies the authentication algorithm to use for encryption. Valid
values are MD5 or SHA1.
key-encryption-
type
(OPTIONAL) Specifies if the authentication key is encrypted.
Valid values: 0 (key is not encrypted) or 7 (key is encrypted).
key
Text string used in authentication.
For MD5 authentication, the key must be 32 hex digits (non-
encrypted) or 64 hex digits (encrypted).
For SHA-1 authentication, the key must be 40 hex digits (non-
encrypted) or 80 hex digits (encrypted).
Defaults
Not configured.
Command Modes
INTERFACE
Command History
Version 9.1.(0.0)
Introduced on the S4810 and Z9000.
Version 8.4.2.0
Introduced on the E-Series TeraScale.
Usage
Information
Before you enable IPsec encryption on an OSPFv3 interface, you must first enable IPv6 unicast
routing globally, configure an IPv6 address and enable OSPFv3 on the interface, and assign the
interface to an area.
An SPI value must be unique to one IPsec security policy (authentication or encryption) on the
router. You must configure the same encryption policy (same SPI and key) on each OSPFv3
interface in a link.
To remove an IPsec encryption policy from an interface, enter the no ipv6 ospf encryption spi
number
command. To remove null authentication on an interface to allow the interface to
inherit the authentication policy configured for the OSPFv3 area, enter the no ipv6 ospf no ipv6
ospf encryption null command.
Related
Commands
area encryption
Configure an IPsec encryption policy for an OSPFv3 area.
show crypto
ipsec policy
Display the configuration of IPsec encryption policies.
show crypto
ipsec sa ipv6
Display the security associations set up for OSPFv3 interfaces in
encryption policies.
1115
Summary of Contents for Force10 Z9000
