Dell Force10 Z9000, Reference Manual

Page: 156 / 1483

Example
FTOS#show memory stack-unit 0
Statistics On Unit 0 Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
268435456 4010354 264425102 264375410 264425102
show processes cpu (C-Series and E-Series)
View CPU usage information based on processes running in the system.
C-Series, E-Series
Syntax show processes cpu [cp | rp1 | rp2] [lp [ linecard-number [ 1-99 ]
| all | summary]
Parameters
cp (OPTIONAL) Enter the keyword
cp
to view CPU usage of the control
processor.
rp1 (OPTIONAL) Enter the keyword
rp1
to view CPU usage of the Route
Processor 1.
NOTE: This option is supported on the E-Series only.
rp2 (OPTIONAL) Enter the keyword
rp2
to view CPU usage of the Route
Processor 2.
lp
linecard
[
1-99
] (OPTIONAL) Enter the keyword
lp
followed by the line card number
to display the CPU usage of that line card.
The optional
1-99
variable sets the number of tasks to display in
order of the highest CPU usage in the past five (5) seconds.
lp all (OPTIONAL) Enter the keyword
lp
all to view CPU utilization on all
active line cards.
lp summary (OPTIONAL) Enter the keyword
lp
summary to view a summary of the
line card CPU utilization.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 Added the
lp all
option.
Version 6.5.1.0 The granularity of the output for
rp1
and
rp2
is changed. The output
is at the process level so process-specific statistics are displayed.
156