Dell Force10 Z9000, Reference Manual

Page: 848 / 1483

NOTE: If a route has a mask greater than 64, no output is displayed and no output is
displayed for
show ipv6 cam stack-unit unit-number port-set {0-1}
ipv6-address
, but an equivalent /64 entry would be listed in the
show ipv6 cam
stack-unit unit-number port-set {0-1}
output. Similarly, if there is more
than one ECMP object with a destination route that has a mask greater than 64, if the first
64 bits in the destination routes of the ECMP objects are the same, only one route is
installed in CAM even though multiple ECMP path entries exist.
NOTE: On the S4810, the self address is displayed in the neighbor portion for the
show
ipv6 cam stack-unit unit-number port-set
command.
show ipv6 control-plane icmp
Displays the status of the icmp control-plane setting for the error eate limit setting.
S4810
Syntax show ipv6 control-plane icmp
Default 100
Command Modes EXEC
Command History
Version 8.3.12.0 Introduced on the S4810.
Related
Commands ipv6 flowlabel-zero – Configure IPv6 address auto-configuration for the management interface.
show ipv6 fib linecard
View all forwarding information base (FIB) entries.
C-Series, E-Series
Syntax show ipv6 fib linecard slot-number {summary | ipv6-address }
Parameters
slot-number Enter the number of the line card slot. E-Series. The range is 0 to 13
on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on a E300.
summary (OPTIONAL) Enter the keyword
summary
to view a summary of
entries in IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display networks
that have more specific prefixes. The range is /0 to /128.
848