Dell Force10 Z9000, Reference Manual

Page: 991 / 1483

30
Multiple Spanning Tree Protocol (MSTP)
Multiple spanning tree protocol (MSTP), as implemented by FTOS, conforms to IEEE 802.1s.
This command supports the Dell Force10 E-Series, C-Series, S-Series, Z-Series, and S4810 platforms.
debug spanning-tree mstp
Enable debugging of the multiple spanning tree protocol and view information on the protocol.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax debug spanning-tree mstp [all | bpdu interface {in | out} |
events]
Parameters
all (OPTIONAL) Enter the keyword all to debug
all
spanning tree
operations.
bpdu
interface
{in |
out}
(OPTIONAL) Enter the keyword
bpdu
to debug bridge protocol data
units (BPDU).
(OPTIONAL) Enter the interface keyword along with the type slot/port
of the interface you want displayed. Type slot/port options are the
following:
• For a Fast Ethernet interface, enter the keyword
FastEthernet
followed by the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a Port Channel interface, enter the keywords
port-
channel
followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword
sonet
followed by
the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
Optionally, enter an
in
or
out
parameter in conjunction with the
optional interface:
• For Receive, enter the keyword
in
.
991