Dell Force10 Z9000, Reference Manual

Page: 174 / 1483

show sfm – view information on the SFM.
show software ifm
Display interface management (IFM) data.
C-Series, S-Series, Z-Series
Syntax show software ifm {clients [summary] | ifagt number | ifcb
interface | stack-unit unit-ID | trace-flags}
Parameters
clients Enter the keyword
clients
to display IFM client information.
summary (OPTIONAL) Enter the keyword
summary
to display brief information
about IFM clients.
ifagt
number
Enter the keyword
ifagt
followed by the number of an interface
agent to display software pipe and IPC statistics.
ifcb interface Enter the keyword
ifcb
followed by one of the following interface
IDs followed by the slot/port information to display interface control
block information for that interface:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
.
• For a Port Channel interface, enter the keyword
port-
channel
followed by a number: The C-Series and S-Series
range is 1 to 128. The E-Series range is 1 to 255 for TeraScale
and 1 to 512 for ExaScale.
• For a 10G Ethernet interface, enter the keyword
TenGigabitEthernet
.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
.
C-Series options also include:
• For a Fast Ethernet interface, enter the keyword
fastethernet
.
• For a Loopback interface, enter the keyword
loopback
.
• For a Management Ethernet interface, enter the keyword
managementethernet
.
• For a Null interface, enter the keyword
null
.
• For a VLAN interface, enter the keyword
vlan
. The range is
1–4094 and 1-2094 for ExaScale.
stack-unit unit-ID Enter the keyword
stack-unit
followed by the stack member
number to display IFM information for that unit. The range is 0-1.
NOTE: This option is only available on the S-Series.
174