Dell Force10 Z9000, Reference Manual

Page: 1070 / 1483

• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
route-map
map-
name
(OPTIONAL) Enter the keywords
route-map
followed by the name
of the route map.
tag
tag-value
(OPTIONAL) Enter the keyword
tag
to set the tag for routes
redistributed into OSPF. The range is 0 to 4294967295.
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for Multi-Process OSPF.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
Usage
Information IS-IS is not supported on the S-Series platforms.
router-id
Use this command to configure a fixed router ID.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax router-id ip-address
To remove the fixed router ID, use the
no router-id ip-address
command.
Parameters
ip-address
Enter the router ID in the IP address format.
Defaults none.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
1070