Dell Force10 Z9000, Reference Manual

Page: 243 / 1483

Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 Added support for the non-contiguous mask and added the
monitor
option.
Version 6.5.10 Expanded to include the optional QoS
order
priority for the ACL
entry.
Usage
Information
The
order
option is relevant in the context of the Policy QoS feature only. For more
information, refer to the “Quality of Service” chapter of the FTOS Configuration Guide .
When you use the
log
option, the CP processor logs details about the packets that match.
Depending on how many packets match the log entry and at what rate, the CP may become
busy as it has to log these packets’ details.
The
monitor
option is relevant in the context of flow-based monitoring only. For more
information, refer to Port Monitoring .
The C-Series and S-Series cannot count both packets and bytes; when you enter the count
byte options, only bytes are incremented.
NOTE: When ACL logging and byte counters are configured simultaneously, byte counters
may display an incorrect value. Configure packet counters with logging instead.
Related
Commands
ip access-list extended – creates an extended ACL.
permit tcp – assigns a permit filter for TCP packets.
permit udp – assigns a permit filter for UDP packets.
permit arp
Configure a filter that forwards ARP packets meeting this criteria. This command is supported only on 12-port GE line
cards with SFP optics; refer to your line card documentation for specifications.
E-Series
Syntax permit arp { destination-mac-address mac-address-mask | any}
vlan vlan-id { ip-address | any | opcode code-number } [count
[byte] | log] [order] [monitor] [fragments]
To remove this filter, you have two choices:
• Use the
no seq sequence-number
command if you know the filter’s sequence
number.
• Use the
{ destination-mac-address mac-address-mask | any}
vlan vlan-id { ip-address | any | opcode code-number }
command.
Parameters
destination-mac-
address mac-
address-mask
Enter a MAC address and mask in the nn:nn:nn:nn:nn format.
For the MAC address mask, specify which bits in the MAC address
must match.
243