DCT Antares SB, User Manual

Page: 22 / 238

1.1. FEATURES
1.1.15 IMEI as ID
This feature allows the unit to tag every reported message with the
unit’s IMEI. This eases the management of unit’s as the ID number
does not require to be programmed and it is a unique number that
can’t be reused or shared with another unit. Also, this number can
not be deleted or changed.
1.1.16 Molex-type connectors
Inputs, outputs, ADC input voltage, ignition sense and power are all
provided on molex-type male connectors which allow for molex-type
female receptacles. This quality industry-proved type of connectors
is very suitable for vehicles’ environments.
1.1.17 SMA Reverse polarity GPS antenna connector
The antennas can not be erroneously interchanged because of the
reverse-polarity condition of the GPS antenna connector.
1.1.18 Event Reporting
Antares SB
TM
has the ability to interpret complex user-defined report-
ing criteria to track normal, as well as exceptional situations. This
is called
Event Report and it is mainly done via the Event Machine
included in the unit’s firmware.
This allows to create scenarios that include the boolean combination
of the following variables:
•
30 Polygon-defined geographical regions (50 points each).
•
10 Speed limits.
•
10 Time windows (dates’ intervals).
•
4 Discrete inputs
•
4 Discrete outputs
•
20 Counters for traveled distance, time and event counting.
•
5 Heading change deltas (turn by turn report).
•
5 Analog to Digital Converter thresholds.
•
5 Back-up battery level thresholds.
•
10 User signals to create more complex reports.
•
The fixed signals:
– Vehicle Ignition.
20