DCT Antares SB, User Manual

Page: 149 / 238

6.5. (ED) EVENT DEFINITION
AABCD;EEE
{
[EEE][F]
}
G[[;ACT=HH...][;ACT=HH...]...]
Chars Item Format Value Meaning
2 Event ID AA 00-49 Decimal number ranging between 00 to 49
(or ’**’).
1 Event
Handling B flag Message routing:
N: Normal. Route the Event Message
to the specified Destination Address
(DA).
X: Serial Port. Route the Event Message
to the unit’s serial port only.
S: Signal only. Do not generate an Event
Message . The event’s signal still fol-
lows the event’s state.
U: Undefined. Delete the event’s defini-
tion.
1 Message ID C flag Generate event message:
V: EV message.
T: ET message.
A: extended-EV message A.
B: extended-EV message B.
C: extended-EV message C.
1 Destination
Address D 0-9 Destination address of the Event Message .
The value of this field is the index of the de-
sired
Destination Address (DA) defined with
the
DA
message.
varies Signal EEE Any signal de-
fined on the Sig-
nals’ table .
Signal(s) used to trigger the event.
1 Logical
Operator F flag Logical operation used to combine signals:
&: AND
| : OR
!: NOT
1 Event Sense G flag Edge of signals’ combination used to trigger
the event:
+: Rising edge
-: Falling edge
varies Event Action HH. . . message A valid TAIP message without the opening
(
> ) and closing ( < ) delimiters. Several TAIP
actions can be defined on a single event. See
the next examples.
147