DCT Antares SB, User Manual

Page: 112 / 238

5.1. GETTING STARTED
Some examples of such tools can be found at:
•
TCP client and listener: TCP Test Tool
TM
from
www.simplecomtools.com
•
UDP client and listener: UDP Test Tool
TM
from
www.simplecomtools.com
• Network sniffer: Ethereal
TM
from
www.ethereal.com.
5.1.8 Adding an Input report
Now we will like to create an Input report to the AVL server having the
event code 05, whenever the Input 3 goes high. This is a simple event that
depends on a single signal transition, signal
IP3
which is the same as signal
G03
2
:
>
SED05NV4;IP3+
<
Now our unit is generating a 5 minutes periodic report and also a special
report whenever the Input 3 goes high
3
.
5.1.9 Script
This example can be resumed with the following script:
#Antares SB script
#Getting Started example
#Delete any previous configuration
>SRT;CONFIG<
>SXADP**U<
#Unit’s ID
>SIDEXAMPLE<
#configuring the SIM’s PIN
>SRFI1234<
#configuring the APN
>SRFAinternet.carrier-name.com<
#The remote AVL server address and port
>SXADP0000avl.server.com;2145<
#A Destination Address holding the
2
G
signals are maintained for backward compatibility. The use of
IP
and
XP
signals is preferred.
3
An input high is an input at GND or 0 volts.
110