DCT Antares SB, User Manual

Page: 195 / 238

6.35. (XAFU) FIRMWARE UPGRADE (OVER THE AIR)
6.35 (XAFU) Firmware Upgrade (Over the air)
Qualifiers :
S
,
R
This message starts an over-the-air firmware update process. This message
returns TAIP error 69 or 90 when used on a unit with this feature disabled.
The message has the following format:
ABBBBCCDD
Chars Item Format Value Meaning
1 Server A 0-1 Firmware server: Use 0 for DCT’s servers, 1 for
user-defined server
a
.
4 Firmware Ver-
sion BBBB Firmware Version to download. The first two
letter must always be 05. The last two indicate
the firmware family. For example, to update to
FW 5.21, BBBB should be set to
0521
.
2 Firmware type CC Type of version to download. Always set this
value to
SV
.
2 Diagnostics
route DD Indicates where to send the diagnostic reports of
the download/installation process. Use a num-
ber between 00 and 15 to indicate a
Destination
Point. Use the letter A plus a number between
0 and 9 to use a
Destination Address .
a
Contact Digital Communications Technologies for more information on this.
For example, to update to firmware version 5.21:
>
SXAFU00521SV15
<
Notice that diagnostic messages will be sent to the serial port (DP 15).
If diagnostic messages have to be sent to Destination Address 5 , use:
>
SXAFU00521SVA5
<
See the Firmware Upgrade section on the Operation chapter for more infor-
mation.
193