DCT Antares SB, User Manual

Page: 238 / 238

10.18. QUERYING THE ANALOG TO DIGITAL CONVERTER
10.18 Querying the Analog to digital converter
To query the voltage value at the ADC input, send:
>
QXAAC
<
10.19 Querying the Internal back-up battery level
To query the voltage value and charge level of the internal back-up battery,
send:
>
QXABS
<
10.20 Driving the unit to sleep power mode
To activate the power saving mode, send:
>
SXAPMA
<
To make the unit go to sleep mode immediately without activating the power
saving mode (once the unit wakes up, it won’t go to sleep again automati-
cally):
>
SXAPMI
<
To deactivate the power saving mode, send:
>
SXAPME
<
10.21 Querying the firmware version
Send:
>
QVR
<
10.22 Activating PAD mode on serial port
Send:
>
SMTP
<
To get the serial port back to TAIP console mode, after using the previ-
ous PAD mode command, send 0x1B (ESC key) over the serial port.
236