DCT Antares SB, User Manual

Page: 115 / 238

5.2. ADDING SMS REPORTING
If no SMS is received on the Phone Number-type destination, consider the
following:
•
The unit can only send SMS messages when registered on GSM. The
Signal LED does not have to be solid ON.
•
The cellular carrier has to provide SMS sending capabilities to the
cellular line being used by the
Antares SB
TM
.
•
The phone number 912345678 may not be exactly the phone number
that should be used for sending SMS messages. A plus sign with
country/area code or similar may be required. See the note on the
Over The Air section of the Operation chapter.
5.2.6 Script
This example which is based on the Getting Started example is resumed on
the following script:
#Antares SB script
#Getting Started example
# + SMS reporting
#Delete any previous configuration
>SRT;CONFIG<
>SXADP**U<
#Unit’s ID
>SIDEXAMPLE<
#configuring the SIM’s PIN
>SRFI1234<
#configuring the APN
>SRFAinternet.carrier-name.com<
#The remote AVL server address and port
>SXADP0000avl.server.com;2145<
#The Phone-Number-type destination
#with support for user-messages ON
>SXADP1010912345678<
#A Destination Address holding the
# server destination
>SDA4;P00<
#A Destination Address holding the
# server destination and phone number
>SDA5;P00,P10<
#Time-only Time And Distance
113