DCT Antares SB, User Manual

Page: 130 / 238

5.8. SAFE ENGINE TURN OFF
#Speed limit for START/STOP detection
>SGS0310080<
#Start 2 minutes timer
>SED38SV0;S03-;ACT=SGC01TC00120<
#Stop the time
>SED39SV0;S03+ACT=SGC01U<
#Create the STOP report
>SED30NV4;C01+<
#Create the START report
>SED31NV4;S03C01&+<
#-------------------------------------------
#--Safe engine turn off---------------------
#Set the speed limit for the time/speed
#condition
>SGS0110150<
#Start 16 seconds timer when the speed
#falls off the previously set value and
#as long as the user signal is set
>SED14SV0;S01!U00&+;ACT=SGC02TC00016<
#Stop the timer when the speed condition
#is violated
>SED15SV0;S01+;ACT=SGC02U<
#Ignition cut event
#Sets output 4 high and
#sends a report to DA 5
>SED13NV5;C02U00&+;ACT=SSSXP41<
#Restore (set low) the user signal
>SED16SV0;E13+;ACT=SSSU000<
#-------------------------------------------
#end
5.8.7 Operation
Having the unit configured this way, the mechanism for driving the ignition
OFF safely is:
1. To start the safe engine turn off process, activate the user signal 00.
For this send to the unit
>
SSSU001
<
128