DCT Antares SB, User Manual

Page: 206 / 238

6.47. (XANB) NETWORK BAND MODE
6.47 (XANB) Network Band mode
Qualifiers :
S
,
Q
,
R
Antares SB
TM
is capable of working on 4 different cellular bands in the fol-
lowing way: With this command the user selects a mode which may be of
mono band or dual-band type. On dual-band modes, bands are automati-
cally switched by the module according to network discovery information.
A mode change will be effective only after a system reset (
>
SRT
< or power-
cycle). The allowed modes are presented in the next table. The message
has the following format:
A
Chars Item Format Value Meaning
1 mode A 0-6 Band mode:
0: mono-band mode 850 MHz.
1: mono-band mode 900 extended MHz (900E).
2: mono-band mode 1800 MHz.
3: mono-band mode 1900 MHz.
4: dual-band mode 850/1900 MHz.
5: dual-band mode 900E(extended)/1800 MHz.
6: dual-band mode 900E(extended)/1900 MHz.
204