DCT Antares SB, User Manual

Page: 20 / 238

1.1. FEATURES
1.1.3 Optional Back-up Battery
The Antares SB
TM
may include
2
a built-in back-up battery to be
used when the vehicle’s battery is unavailable. Refer to the Operation
chapter for more information.
1.1.4 Voice support
An audio jack for non-balanced hands-free audio system is provided to
initiate and receive phone calls with the unit. Refer to the
Operation
and Configuration chapters.
1.1.5 SMS support
When the unit is registered on the GSM network in can send and
receive SMSs. This feature is used to send user-defined event’s text
to phone numbers, TAIP reports to SMPP servers and to receive
commands or queries to interact with the unit over-the-air. See the
Operation and Configuration chapters.
1.1.6 TCP and UDP support
The unit may send its reports via GPRS to IP hosts using TCP
and/or UDP transport protocols. As an improvement from previous
versions, all IP-type
Destinations can be used either on TCP or UDP
and the unit may work with Destinations on TCP and with Destina-
tions on UDP at the same time. This means that a global parameter
(
XASP
) defining the transport protocol for all DPs no longer exists.
The
DP
and
XADP
TAIP messages have been modified to support
this new feature.
Note:
.
1.1.7 Over the air control/consult
The unit can be controlled/consulted remotely via GPRS (TCP or
UDP) and/or via GSM by means of SMS messages.
1.1.8 Over the air upgrade
The unit’s firmware may be upgraded
3
via GPRS communication
with a single instruction.
2
Ask for built-in battery when buying the unit.
3
Not all units have this feature enabled. TAIP error 69 or 90 is returned when
using the firmware upgrade command (
XAFU
)
18