DCT Antares SB, User Manual

Page: 126 / 238

5.8. SAFE ENGINE TURN OFF
#Create the violation report
>SED10NV4;C00+<
#Drive a LED on output 1 ON
#when the speed goes beyond the limit
#(silent event)
>SED42SV0;S07+;ACT=SSSXP11<
#Drive a LED on output 1 OFF
#when the speed falls off the limit
#(silent event)
>SED43SV0;S07-;ACT=SSSXP10<
#-------------------------------------------
#--START/STOP monitoring--------------------
#Speed limit for START/STOP detection
>SGS0310080<
#Start a 2 minutes timer
>SED38SV0;S03-;ACT=SGC01TC00120<
#Stop the timer
>SED39SV0;S03+ACT=SGC01U<
#Create the STOP report
>SED30NV4;C01+<
#Create the START report
>SED31NV4;S03C01&+<
#-------------------------------------------
#end
5.8 Safe engine turn off
This configuration is used to drive an output high after a user command
4
only when the following condition is met:
The vehicle stays under a given low speed limit for a given period of time.
This is suitable for connecting an ignition cutter to the output so a ve-
hicle’s engine is only turned off when a safe speed condition exists.
For this example let’s set an under-speed condition of 15mph with a time
condition of 16 seconds. Let’s assume the ignition cutter is wired to output
4
A command received locally or over the air.
124