DCT Antares SB, User Manual

Page: 119 / 238

5.6. SPEED VIOLATION (WITH WARNING) REPORT
#The remote AVL server address and port
>SXADP0000avl.server.com;2145<
#The Phone-Number-type destination
#with support for user-messages ON
>SXADP1010912345678<
#A Destination Address holding the
# server destination
>SDA4;P00<
#A Destination Address holding the
# server destination and phone number
>SDA5;P00,P10<
#Time-only Time And Distance
#signal definition
>STD80300<
#Event triggered by T&D signal
>SED37NV4;TD8+<
#Input report event
>SED05NV5;IP3+<
#User text message for event 05
>SXATM05Input 3 has been activated!<
#Ignition ON event
>SED19NV4;F00+<
#Ignition OFF event
>SED20NV4;F00-<
#end
5.6 Speed violation (with warning) report
An speed limit violation event that is generated whenever the vehicle ex-
ceeds a determinated value can be configured as it was done on the
Setting
Speed Limits of the Configuration chapter. Here we are going to add a
continuous-time condition with a visual warning (with a LED) so the driver
has a chance to slow down before actually reporting the violation.
For this example let’s set an speed limit of 65mph . Let’s give 15 seconds to
the driver for slowing down. Let’s assume the indicator LED for the speed
excess warning is wired to output 1 (
XP1
). The reporting event code for the
violation, for no particular reason is
10
.
117