Profiler User Guide
4-52
“smoothed” portion.
The
Esc
key will de-select the grips.
If you toggle the Profile option in the legend box on the right side, it
will turn off the grips and show you the driveshaft line that was
created compared to the original one that was imported.
The Profiler software makes this easy. Toggle
the grips back on by selecting the Profile in the
legend box.
Toggle the grips back On by selecting the Profile
in the legend box.
You can zoom in on
a section of grips by
holding down the
right mouse button
and drawing a
rectangular box around the area you wish to see. To return to the
full view again, select the Zoom Max button in the tool bar.
Offsetting Selections of Grips
You may wish to offset a particular section of the driveshaft Profile
up or down some RPM. You can select the range of grips you wish to
adjust and manually move them as described earlier, however
there’s another more automated way to do it.
Select the range of grips you want to adjust.
Summary of Contents for Profiler
