DAVIS TECHNOLOGIES Profiler, User Manual

Page: 64 / 165

Profiler User Guide
4-18
Lock Adjustments locks the
settings options below it so
they can’t be changed. It
does not
affect timing.
Notice that whichever window (Profile
or Timing), the active window will have a
purple dotted line frame indicating this
window is active.
The baseline Timing parameters are
located at the left side of the Timing
window.
It will indicate whether a Smart Drop
™
parameter was used in the Zone settings.
In this example, Smart Drop
™
was NOT
used so indicates “Disabled”
If the
Lock Timing Settings
box is checked,
parameters in the options boxes will not be available to edit.
Trigger Position
This is a reference point for the highest amount of timing you want
to run the engine. (with the Profiler turned
OFF
, set this with your
timing light), i.e. as the example above set timing to 30º.
Advance Limit
This is the highest timing reference you want with maximum timing
Profiler will advance. (up to the
Trigger Position
setting)
Static Timing
Set Static Timing to your desired crank trigger timing. (when Profiler
is turned
On
it will retard timing to this setting. Profiler turned OFF
and timing will be at the
Trigger Position
setting)