Profiler User Guide
4-10
Zone Settings
is a strong feature of the Profiler. Each Zone will make
corrections in timing as the car goes down the track. This allows you
to program multiple “zones” in your Profile,
and then apply settings
to each zone. An example might be your first zone may be from
launch to 1.5 seconds into the run. You can apply a set of
parameters for that first 1.5 seconds, and then apply a different set
of parameters from 1.5 to 3 seconds for example.
Clicking >
Zone Settings
icon toggles
the Zone Settings
window On
and Off.
In this example there are three separate zones set up. Each zone has
its own range of settings you can program. You can also add, delete,
or save zones to the library
Zones
folder using the on-screen buttons
in the left side of the window.
Zone 1
will always be there by default. Notice it begins at the start
of a run, 0.00. The option is to set the end time, as in the example
above Zone 1 is from launch to .08 second. Zone 2 is from .08
second to .35 seconds and so on.
TC
(Self-Learning Traction Control) has a sensitivity setting adjustable
from 0-5. With a setting higher than zero , sensitivity is increased
proportionally. The
Retard
range available is
0 to a maximum of the
number
of degrees of timing you enter in
Ret3
. (Whatever the TC
Retard value is set to, it cannot pull more than the value of
Retard 3
)
Summary of Contents for Profiler
