Profiler User Guide
Appendix-52
From Touch Screen
Main >System Options > Configure Inputs >Arm >
Positive
Voltage
Trans-Brake Nitrous Lockout
If you want to have the Profiler activate your Trans-
Brake(recommended), use the built in BumpBox , and/or ProAxe,
you will want to retain your nitrous lock-out when the Trans-Brake is
activated. You can move the Trans-Brake to the Profiler but leave
the existing wiring that is on the Speedwire 8 circuit car wiring
controller (Trans-Brake post) such as the MSD Dark Blue wire, etc.
Connect the Profiler Blue wire pin #20 (Launch Sync Trigger Out) to
the Speedwire 8 circuit board header as shown below.
You will need to configure the
input to Negative when the
Trans-Brake is activated.
From PC Software
System Options Tab > Configure Outputs >Launch Output
>
Inverted
Summary of Contents for Profiler
