PAGE 1 OF 7
0413 IH-3934
H-3934, H-3935
ELECTRIC LIFT TABLE
1-800-295-5510
uline.com
π
TECHNICAL INFORMATION
SAFETY GUIDELINES
SPECIFICATIONS
H-3934
H-3935
Weight Capacity
2,000 lbs.
2,000 lbs.
Min. Table Height
8⁄"
8⁄"
Max. Table Height
38⁄"
38⁄"
Travel
30"
30"
Platform Width
28"
36"
Platform Length
48"
48"
Base Frame Width
24⁄
"
24⁄
"
Base Frame Length
49
"
49
"
Weight
402 lbs.
416 lbs.
Sound Pressure Level
<70dB(a)
<70dB(a)
Operating Environment
Indoors
Indoors
WARNING! Do not operate this lift table unless
you have been trained to use it, authorized
to do so and have checked that it is in good
condition. The operator should read all of the
warning signs and instructions here and on the
lift table before using it.
1. DO NOT concentrate the load at one point on the
platform or pallet. ALWAYS uniformly distribute each
layer of load over the supporting surface.
2. DO NOT use the lift for any purpose other than its
intended use.
3. DO NOT install the lift table on an unlevel or soft
surface. The lift base frame must be supported
along its entire length and width. Failure to
completely support the base frame could result in
damage to the lift.
4. DO NOT use the lift table with an unstable,
unbalanced or loosely stacked load. Unbalanced
loads may become unstable and fall. SEVERE
PERSONAL INJURY and PROPERTY DAMAGE may result.
5. DO NOT overload the lift table. ALWAYS stay within
the designated capacity ratings. SEVERE PERSONAL
INJURY and PROPERTY DAMAGE could result.
6. SHEARING HAZARD. ALWAYS keep hands and feet
clear of the scissor mechanism and all moving
components. DO NOT put hands or fingers under
the platform when in use. SEVERE PERSONAL INJURY
could result.
7. CRUSHING HAZARD. ALWAYS keep hands and feet
clear of all moving components. DO NOT put feet
on the base frame when in use. SEVERE PERSONAL
INJURY could result.
8. PINCH POINT HAZARD. ALWAYS keep feet, hands and
fingers away from the underside of the platform and
all moving components. SEVERE PERSONAL INJURY
could result.
9. DO NOT change the relief valve setting. The relief
valve is installed to protect the operator and the
lift table. Changing the relief valve setting may
compromise the performance and safety of the lift.
SEVERE PERSONAL INJURY and PROPERTY DAMAGE
could result.
Platform Length
Platform
Width
Base
Width
Raised
Height
Lowered
Height
Travel
Base Length
